Skip to main content
WaterSafeCheck
Official EPA SDWIS Verified ReportWater Quality & Testing GuideHistorical Record: No Recorded SDWIS Violations

ZIP Code 10607 Water Quality & Testing Report

White Plains, NY · Westchester County County · Updated for 2026

Public Health & Medical Notice: Drinking water quality data on this page reflects historical compliance records submitted under the Safe Drinking Water Act. This information does not constitute medical advice or a real-time safety guarantee. If you are pregnant, nursing, preparing infant formula, or immunocompromised, consult a healthcare provider. Boiling water kills biological pathogens, but does NOT remove chemical contaminants like lead, arsenic, or PFAS.
Quick EPA Verified Answer

Is Tap Water Safe to Drink in ZIP 10607 (White Plains, NY)?

Yes, tap water in ZIP code 10607 (White Plains, NY) is safe to drink under EPA Safe Drinking Water Act standards. Supplied by White Plains City, the area earns an EPA Safety Grade of B (83/100) with 0 health violations, 1.2 ppb lead, and soft (50 mg/L / 2.9 GPG) water.

Safety Score
B

Water Safety Grade

Good — Minor issues on record

Health Violations

0

Total Violations

5

Lead Risk

High

Contaminants

0

⚠

Active Water Quality Issues Detected

EPA records show 0 unresolved violation. Contact White Plains City for current status.

About Tap Water in ZIP Code 10607

Tap water in ZIP code 10607 (White Plains, NY) is distributed by White Plains City (EPA ID: NY5903464), serving approximately 59,559 residents. Based on EPA Safe Drinking Water Act compliance records, this system receives a water safety grade of B with a composite quality score of 83/100.

Water System

White Plains City

EPA ID: NY5903464

Water Source

Surface Water

Population Served

59,559 residents

County

Westchester County County, New York

🧪

Lead Levels in ZIP 10607

EPA action level: 15 ppb | Public health goal: 0 ppb

Lead Level: 1.2 ppb — Very Low

The 90th percentile lead level in 10607 is 1.2 ppb. This meets the EPA action level of 15 ppb. Health experts recommend a target of 0 ppb for optimal safety.

Lead exposure risk in 10607 is rated High. EPA models estimate a 52% exposure probability based on housing and infrastructure age.

Lead Level (90th percentile)
1.20 ppb (0.0012 mg/L)
Lead (Consumer Confidence Report)

From annual CCR filing

1.2 ppb
Lead Exposure Risk Rating
High
Lead Exposure Probability

EPA model estimate based on housing age and infrastructure

52%
Note: Lead levels above are the 90th percentile from EPA monitoring — meaning 90% of samples were at or below this level. Even "undetected" tap water lead doesn't account for lead leaching from home plumbing. If your home was built before 1986, individual tap testing is recommended.
🪨

Water Hardness & Mineral Content

Grains per gallon (GPG) & Parts per million (PPM / mg/L)

Classification: Soft2.9 GPG · 50 mg/L

Water in ZIP 10607 is classified as Soft (50 mg/L / 2.9 GPG). Soft water produces abundant soap lather, prevents scale buildup in water heaters, and does not leave spots on dishes.

Recommendation: No water softener is needed. Standard carbon filtration is sufficient for taste and chlorine reduction.
Hardness (GPG)

Grains per gallon

2.9 GPG
Hardness (PPM / mg/L)

Parts per million CaCO3

50 mg/L
Appliance Scaling Risk
Very Low

Official EPA SDWIS Database Entry

Utility: White Plains City · PWSID: NY5903464

Verify on EPA.gov
📋

Violation History

Past 5 years — EPA SDWIS data

White Plains City has recorded 5 violations, but none are health-based (e.g., administrative or monitoring infractions).

Total Violations (5 yr)
5
Health-Based Violations
0
Unresolved Violations
0
Boil Water Advisories
0
Compliance Risk
High

Regulatory compliance risk for this utility is rated High based on past reporting and enforcement records.

⚗️

Contaminants Detected

Contaminants with health-based violations on record

No health-based contaminant violations are on record for ZIP code 10607 under the Safe Drinking Water Act.

⚖ Enforcement Actions

EPA or state regulators have issued 10 enforcement actions to address compliance lapses.
🌊

Water Source & Environmental Factors

Surface Water

This system draws water from lakes, rivers, or reservoirs. Surface water is treated to remove sediment, microorganisms, and chemical contaminants before reaching taps.

Water Source Type
Surface Water
CCR Source Classification
Surface Water (Purchased)
EPA Radon Zone

Lower potential

Zone 3
Annual Flood Risk Cost

Estimated annual flood-related costs per property

$27
Energy Burden

% of household income spent on energy — indicator of older infrastructure

1.78%

EPA Radon Zone 3 — lower radon potential, though the EPA still recommends testing all homes.

Water Quality Testing in ZIP 10607

Tap Water & Well Testing Recommendations

Residents in ZIP code 10607 served by White Plains City can test tap water or private well systems to verify water purity. Testing detects hidden contaminants before they impact family health.

Tap Water Testing Steps

  • 1.Conduct a certified lead check if your home was constructed before 1986.
  • 2.Use certified lab testing kits rather than uncalibrated test strips for regulated compliance.
  • 3.Sample water from both your kitchen faucet and water heater to compare line purity.

Private Well Testing Steps

  • •Test for Coliform bacteria and Nitrates annually.
  • •Test for heavy metals, radon, and PFAS every 3 years.
  • •Send samples to a state-certified drinking water laboratory recognized by New York State Department of Health.
Certified Lab Testing: Always use an EPA-certified drinking water laboratory in NY for formal legal or real estate compliance testing.

🛡 What Should You Do? — ZIP 10607 Recommendations

  • ✓ Run cold water for 30 seconds each morning before use — especially if pipes are old
  • ✓ Request your annual Consumer Confidence Report from White Plains City
  • ✓ If your home was built before 1986, consider testing your own tap for lead
  • ✓ Use a pitcher filter (NSF/ANSI 42 certified) for improved taste

Recommended Taste & Safety Filter:

🚰

NSF/ANSI 53 Certified Pitcher Filter

Best for removing aesthetic chlorine, odors, and low-level heavy metals.

Filter Selection Guide →

Frequently Asked Questions — ZIP 10607 Water Quality

Is tap water safe to drink in ZIP code 10607?+
Yes — tap water in 10607 (White Plains, NY) meets EPA standards with a water safety grade of B. No health-based violations are on record in the past 5 years.
How do I get my water tested in ZIP 10607 (White Plains, NY)?+
To test water quality in ZIP 10607, you can order a certified drinking water test kit or send water samples to an EPA/NELAP certified laboratory in NY. Certified testing checks for lead, coliform bacteria, nitrates, hardness, and PFAS that standard test strips miss. Contact New York State Department of Health for a list of certified regional labs.
How hard is the tap water in 10607?+
Tap water in 10607 is classified as Soft with an estimated mineral hardness of 50 mg/L (2.9 GPG). No water softener is needed. Standard carbon filtration is sufficient for taste and chlorine reduction.
Should I test private well water in 10607?+
Yes. Unlike municipal systems, private wells in 10607 are not regulated by the EPA or local utilities. Private well owners should test their water annually for coliform bacteria and nitrates, and every 3 to 5 years for heavy metals (lead, arsenic) and volatile organic compounds.
What is the lead level in 10607 tap water?+
The 90th percentile lead level in 10607 is 1.2 ppb. The EPA action level is 15 ppb. This is below the EPA action level.
Is there an active boil water notice in 10607?+
There are currently no active boil water advisories on record for 10607. Water treatment systems are operating within normal parameters.
Who provides tap water to 10607?+
Tap water in ZIP code 10607 is provided by White Plains City (EPA ID: NY5903464), serving approximately 59,559 residents.
What water filter should I use in 10607?+
Based on water metrics for 10607, we recommend Lead & Microplastic Filter. Look for certifications such as NSF/ANSI 53 (Lead Reduction), NSF/ANSI 42 (Particulate/Taste).

Data Sources & Methodology

Water quality data for ZIP code 10607 is compiled from the EPA Safe Drinking Water Information System (SDWIS), EPA ECHO enforcement database, UCMR5 unregulated contaminant monitoring, and Consumer Confidence Reports filed by White Plains City. Safety scores are composite metrics derived from violation history, lead levels, enforcement actions, and infrastructure risk indicators. Data reflects a 5-year monitoring window. Last dataset update: 2024. View EPA source data →