Skip to main content
WaterSafeCheck
Official EPA SDWIS Verified ReportWater Quality & Testing GuideStatus: Normal Operations

ZIP Code 39552 Water Quality & Testing Report

Escatawpa, MS · Jackson County County · Updated for 2026

Quick EPA Verified Answer

Is Tap Water Safe to Drink in ZIP 39552 (Escatawpa, MS)?

Yes, tap water in ZIP code 39552 (Escatawpa, MS) is safe to drink under EPA Safe Drinking Water Act standards. Supplied by Helena Utility District, the area earns an EPA Safety Grade of B (84/100) with 1 health violations, 3.3 ppb lead, and moderately hard (60 mg/L / 3.5 GPG) water.

Safety Score
B

Water Safety Grade

Good — Minor issues on record

Health Violations

1

Total Violations

4

Lead Risk

N/A

Contaminants

1

⚠

Active Water Quality Issues Detected

EPA records show 1 unresolved violation. Contact Helena Utility District for current status.

About Tap Water in ZIP Code 39552

Tap water in ZIP code 39552 (Escatawpa, MS) is distributed by Helena Utility District (EPA ID: MS0300163), serving approximately 497 residents. Based on EPA Safe Drinking Water Act compliance records, this system receives a water safety grade of B with a composite quality score of 84/100.

Water System

Helena Utility District

EPA ID: MS0300163

Water Source

Surface Water

Population Served

497 residents

County

Jackson County County, Mississippi

🧪

Lead Levels in ZIP 39552

EPA action level: 15 ppb | Public health goal: 0 ppb

Lead Level: 3.3 ppb — Very Low

The 90th percentile lead level in 39552 is 3.3 ppb. This meets the EPA action level of 15 ppb. Health experts recommend a target of 0 ppb for optimal safety.
Lead Level (90th percentile)
3.30 ppb (0.0033 mg/L)
Lead Exposure Risk Rating
Unknown
Note: Lead levels above are the 90th percentile from EPA monitoring — meaning 90% of samples were at or below this level. Even "undetected" tap water lead doesn't account for lead leaching from home plumbing. If your home was built before 1986, individual tap testing is recommended.
🪨

Water Hardness & Mineral Content

Grains per gallon (GPG) & Parts per million (PPM / mg/L)

Classification: Moderately Hard3.5 GPG · 60 mg/L

Water in ZIP 39552 is Moderately Hard (60 mg/L / 3.5 GPG). It contains beneficial natural minerals like calcium and magnesium without causing heavy scale accumulation.

Recommendation: A water softener is optional. Regular maintenance of hot water appliances is recommended.
Hardness (GPG)

Grains per gallon

3.5 GPG
Hardness (PPM / mg/L)

Parts per million CaCO3

60 mg/L
Appliance Scaling Risk
Low / Moderate

Official EPA SDWIS Database Entry

Utility: Helena Utility District · PWSID: MS0300163

Verify on EPA.gov
📋

Violation History

Past 5 years — EPA SDWIS data

Helena Utility District has recorded 1 health-based violation out of 4 total violations over the past 5 years. 1 violation remains unresolved in EPA tracking records.

Total Violations (5 yr)
4
Health-Based Violations
1
Unresolved Violations
1
Boil Water Advisories
0
Compliance Risk
Critical

Regulatory compliance risk for this utility is rated Critical based on past reporting and enforcement records.

⚗️

Contaminants Detected

Contaminants with health-based violations on record

EPA records identify 1 contaminant with health-based violations in the past 5 years: Stage 2 DBP Rule.

Stage 2 DBP Rule

⚖ Enforcement Actions

EPA or state regulators have issued 6 enforcement actions to address compliance lapses.
🌊

Water Source & Environmental Factors

Surface Water

This system draws water from lakes, rivers, or reservoirs. Surface water is treated to remove sediment, microorganisms, and chemical contaminants before reaching taps.

Water Source Type
Surface Water
EPA Radon Zone

Lower potential

Zone 3

EPA Radon Zone 3 — lower radon potential, though the EPA still recommends testing all homes.

Water Quality Testing in ZIP 39552

Tap Water & Well Testing Recommendations

Residents in ZIP code 39552 served by Helena Utility District can test tap water or private well systems to verify water purity. Testing detects hidden contaminants before they impact family health.

Tap Water Testing Steps

  • 1.Conduct a certified lead check if your home was constructed before 1986.
  • 2.Use certified lab testing kits rather than uncalibrated test strips for regulated compliance.
  • 3.Sample water from both your kitchen faucet and water heater to compare line purity.

Private Well Testing Steps

  • •Test for Coliform bacteria and Nitrates annually.
  • •Test for heavy metals, radon, and PFAS every 3 years.
  • •Send samples to a state-certified drinking water laboratory recognized by Mississippi State Department of Health.
Certified Lab Testing: Always use an EPA-certified drinking water laboratory in MS for formal legal or real estate compliance testing.

🛡 What Should You Do? — ZIP 39552 Recommendations

  • ✓ Run cold water for 30 seconds each morning before use — especially if pipes are old
  • ✓ Request your annual Consumer Confidence Report from Helena Utility District
  • ✓ If your home was built before 1986, consider testing your own tap for lead
  • ✓ Use a pitcher filter (NSF/ANSI 42 certified) for improved taste

Recommended Taste & Safety Filter:

🚰

NSF/ANSI 53 Certified Pitcher Filter

Best for removing aesthetic chlorine, odors, and low-level heavy metals.

Filter Selection Guide →

Frequently Asked Questions — ZIP 39552 Water Quality

Is tap water safe to drink in ZIP code 39552?+
Yes — tap water in 39552 (Escatawpa, MS) meets EPA standards with a water safety grade of B. No health-based violations are on record in the past 5 years.
How do I get my water tested in ZIP 39552 (Escatawpa, MS)?+
To test water quality in ZIP 39552, you can order a certified drinking water test kit or send water samples to an EPA/NELAP certified laboratory in MS. Certified testing checks for lead, coliform bacteria, nitrates, hardness, and PFAS that standard test strips miss. Contact Mississippi State Department of Health for a list of certified regional labs.
How hard is the tap water in 39552?+
Tap water in 39552 is classified as Moderately Hard with an estimated mineral hardness of 60 mg/L (3.5 GPG). A water softener is optional. Regular maintenance of hot water appliances is recommended.
Should I test private well water in 39552?+
Yes. Unlike municipal systems, private wells in 39552 are not regulated by the EPA or local utilities. Private well owners should test their water annually for coliform bacteria and nitrates, and every 3 to 5 years for heavy metals (lead, arsenic) and volatile organic compounds.
What is the lead level in 39552 tap water?+
The 90th percentile lead level in 39552 is 3.3 ppb. The EPA action level is 15 ppb. This is below the EPA action level.
Is there an active boil water notice in 39552?+
There are currently no active boil water advisories on record for 39552. Water treatment systems are operating within normal parameters.
Who provides tap water to 39552?+
Tap water in ZIP code 39552 is provided by Helena Utility District (EPA ID: MS0300163), serving approximately 497 residents.
What water filter should I use in 39552?+
Based on water metrics for 39552, we recommend Reverse Osmosis (PFAS & Lead). Look for certifications such as NSF/ANSI 53 (Chemical Contaminants), NSF/ANSI 42 (Aesthetic Effects).

Data Sources & Methodology

Water quality data for ZIP code 39552 is compiled from the EPA Safe Drinking Water Information System (SDWIS), EPA ECHO enforcement database, UCMR5 unregulated contaminant monitoring, and Consumer Confidence Reports filed by Helena Utility District. Safety scores are composite metrics derived from violation history, lead levels, enforcement actions, and infrastructure risk indicators. Data reflects a 5-year monitoring window. Last dataset update: 2024. View EPA source data →