Skip to main content
WaterSafeCheck
Official EPA SDWIS Verified ReportWater Quality & Testing GuideStatus: Normal Operations

ZIP Code 40010 Water Quality & Testing Report

Buckner, KY · Oldham County County · Updated for 2026

Quick EPA Verified Answer

Is Tap Water Safe to Drink in ZIP 40010 (Buckner, KY)?

Yes, tap water in ZIP code 40010 (Buckner, KY) is safe to drink under EPA Safe Drinking Water Act standards. Supplied by Oldham County Water District, the area earns an EPA Safety Grade of B (83/100) with 0 health violations, 1.0 ppb lead, and hard (163 mg/L / 9.5 GPG) water.

Safety Score
B

Water Safety Grade

Good — Minor issues on record

Health Violations

0

Total Violations

0

Lead Risk

Low

Contaminants

0

About Tap Water in ZIP Code 40010

Tap water in ZIP code 40010 (Buckner, KY) is distributed by Oldham County Water District (EPA ID: KY0930333), serving approximately 38,409 residents. Based on EPA Safe Drinking Water Act compliance records, this system receives a water safety grade of B with a composite quality score of 83/100.

Water System

Oldham County Water District

EPA ID: KY0930333

Water Source

Ground Water

Population Served

38,409 residents

County

Oldham County County, Kentucky

🧪

Lead Levels in ZIP 40010

EPA action level: 15 ppb | Public health goal: 0 ppb

Lead Level: 1.0 ppb — Very Low

The 90th percentile lead level in 40010 is 1.0 ppb. This meets the EPA action level of 15 ppb. Health experts recommend a target of 0 ppb for optimal safety.

Lead exposure risk in 40010 is rated Low. EPA models estimate a 13% exposure probability based on housing and infrastructure age.

Lead Level (90th percentile)
1.00 ppb (0.001 mg/L)
Lead Exposure Risk Rating
Low
Lead Exposure Probability

EPA model estimate based on housing age and infrastructure

13%
Note: Lead levels above are the 90th percentile from EPA monitoring — meaning 90% of samples were at or below this level. Even "undetected" tap water lead doesn't account for lead leaching from home plumbing. If your home was built before 1986, individual tap testing is recommended.
🪨

Water Hardness & Mineral Content

Grains per gallon (GPG) & Parts per million (PPM / mg/L)

Classification: Hard9.5 GPG · 163 mg/L

Water in ZIP 40010 is Hard (163 mg/L / 9.5 GPG). Residents may notice white mineral spots on glassware, reduced soap efficiency, and mineral scale on faucets and showerheads.

Recommendation: An ion-exchange water softener or descaler is recommended to prolong the life of water heaters, dishwashers, and plumbing.
Hardness (GPG)

Grains per gallon

9.5 GPG
Hardness (PPM / mg/L)

Parts per million CaCO3

163 mg/L
Appliance Scaling Risk
High / Severe

Official EPA SDWIS Database Entry

Utility: Oldham County Water District · PWSID: KY0930333

Verify on EPA.gov
📋

Violation History

Past 5 years — EPA SDWIS data

Oldham County Water District has recorded zero violations in the EPA compliance database over the past 5 years.

Total Violations (5 yr)
0
Health-Based Violations
0
Unresolved Violations
0
Boil Water Advisories
0
Compliance Risk
Low

Regulatory compliance risk for this utility is rated Low based on past reporting and enforcement records.

⚗️

Contaminants Detected

Contaminants with health-based violations on record

No health-based contaminant violations are on record for ZIP code 40010 under the Safe Drinking Water Act.

🌊

Water Source & Environmental Factors

Ground Water

This system draws water from underground aquifers. Groundwater is naturally filtered through soil and rock, but can still contain naturally occurring minerals like arsenic, radium, or nitrates.

Water Source Type
Ground Water
EPA Radon Zone

Moderate potential

Zone 2
Energy Burden

% of household income spent on energy — indicator of older infrastructure

1.07%

EPA Radon Zone 2 — moderate radon potential. The EPA recommends testing your home regardless of zone designation.

Water Quality Testing in ZIP 40010

Tap Water & Well Testing Recommendations

Residents in ZIP code 40010 served by Oldham County Water District can test tap water or private well systems to verify water purity. Testing detects hidden contaminants before they impact family health.

Tap Water Testing Steps

  • 1.Conduct a certified lead check if your home was constructed before 1986.
  • 2.Use certified lab testing kits rather than uncalibrated test strips for regulated compliance.
  • 3.Sample water from both your kitchen faucet and water heater to compare line purity.

Private Well Testing Steps

  • •Test for Coliform bacteria and Nitrates annually.
  • •Test for heavy metals, radon, and PFAS every 3 years.
  • •Send samples to a state-certified drinking water laboratory recognized by Kentucky Department for Environmental Protection.
Certified Lab Testing: Always use an EPA-certified drinking water laboratory in KY for formal legal or real estate compliance testing.

🛡 What Should You Do? — ZIP 40010 Recommendations

  • ✓ Run cold water for 30 seconds each morning before use — especially if pipes are old
  • ✓ Request your annual Consumer Confidence Report from Oldham County Water District
  • ✓ If your home was built before 1986, consider testing your own tap for lead
  • ✓ Use a pitcher filter (NSF/ANSI 42 certified) for improved taste

Recommended Taste & Safety Filter:

🚰

NSF/ANSI 53 Certified Pitcher Filter

Best for removing aesthetic chlorine, odors, and low-level heavy metals.

Filter Selection Guide →

Frequently Asked Questions — ZIP 40010 Water Quality

Is tap water safe to drink in ZIP code 40010?+
Yes — tap water in 40010 (Buckner, KY) meets EPA standards with a water safety grade of B. No health-based violations are on record in the past 5 years.
How do I get my water tested in ZIP 40010 (Buckner, KY)?+
To test water quality in ZIP 40010, you can order a certified drinking water test kit or send water samples to an EPA/NELAP certified laboratory in KY. Certified testing checks for lead, coliform bacteria, nitrates, hardness, and PFAS that standard test strips miss. Contact Kentucky Department for Environmental Protection for a list of certified regional labs.
How hard is the tap water in 40010?+
Tap water in 40010 is classified as Hard with an estimated mineral hardness of 163 mg/L (9.5 GPG). An ion-exchange water softener or descaler is recommended to prolong the life of water heaters, dishwashers, and plumbing.
Should I test private well water in 40010?+
Yes. Unlike municipal systems, private wells in 40010 are not regulated by the EPA or local utilities. Private well owners should test their water annually for coliform bacteria and nitrates, and every 3 to 5 years for heavy metals (lead, arsenic) and volatile organic compounds.
What is the lead level in 40010 tap water?+
The 90th percentile lead level in 40010 is 1.0 ppb. The EPA action level is 15 ppb. This is below the EPA action level.
Is there an active boil water notice in 40010?+
There are currently no active boil water advisories on record for 40010. Water treatment systems are operating within normal parameters.
Who provides tap water to 40010?+
Tap water in ZIP code 40010 is provided by Oldham County Water District (EPA ID: KY0930333), serving approximately 38,409 residents.
What water filter should I use in 40010?+
Based on water metrics for 40010, we recommend None / Standard Pitcher. Look for certifications such as NSF/ANSI 42 (Chlorine, Taste & Odor).

Data Sources & Methodology

Water quality data for ZIP code 40010 is compiled from the EPA Safe Drinking Water Information System (SDWIS), EPA ECHO enforcement database, UCMR5 unregulated contaminant monitoring, and Consumer Confidence Reports filed by Oldham County Water District. Safety scores are composite metrics derived from violation history, lead levels, enforcement actions, and infrastructure risk indicators. Data reflects a 5-year monitoring window. Last dataset update: 2024. View EPA source data →