Skip to main content
WaterSafeCheck
Official EPA SDWIS Verified ReportWater Quality & Testing GuideStatus: Normal Operations

ZIP Code 62260 Water Quality & Testing Report

Millstadt, IL · St Clair County County · Updated for 2026

Quick EPA Verified Answer

Is Tap Water Safe to Drink in ZIP 62260 (Millstadt, IL)?

Yes, tap water in ZIP code 62260 (Millstadt, IL) is safe to drink under EPA Safe Drinking Water Act standards. Supplied by Millstadt, the area earns an EPA Safety Grade of B (75/100) with 0 health violations, 0 ppb lead, and very hard (193 mg/L / 11.3 GPG) water.

Safety Score
B

Water Safety Grade

Good — Minor issues on record

Health Violations

0

Total Violations

1

Lead Risk

High

Contaminants

0

About Tap Water in ZIP Code 62260

Tap water in ZIP code 62260 (Millstadt, IL) is distributed by Millstadt (EPA ID: IL1630850), serving approximately 4,071 residents. Based on EPA Safe Drinking Water Act compliance records, this system receives a water safety grade of B with a composite quality score of 75/100.

Water System

Millstadt

EPA ID: IL1630850

Water Source

Surface Water

Population Served

4,071 residents

County

St Clair County County, Illinois

🧪

Lead Levels in ZIP 62260

EPA action level: 15 ppb | Public health goal: 0 ppb

Lead Data Not Available

Lead testing data was not found in EPA records for ZIP code 62260. Contact Millstadt to request lead testing results.

Lead exposure risk in 62260 is rated High. EPA models estimate a 51% exposure probability based on housing and infrastructure age.

Lead Exposure Risk Rating
High
Lead Exposure Probability

EPA model estimate based on housing age and infrastructure

51%
Note: Lead levels above are the 90th percentile from EPA monitoring — meaning 90% of samples were at or below this level. Even "undetected" tap water lead doesn't account for lead leaching from home plumbing. If your home was built before 1986, individual tap testing is recommended.
🪨

Water Hardness & Mineral Content

Grains per gallon (GPG) & Parts per million (PPM / mg/L)

Classification: Very Hard11.3 GPG · 193 mg/L

Water in ZIP 62260 is Very Hard (193 mg/L / 11.3 GPG). High concentrations of dissolved limestone minerals cause severe mineral buildup, stiff laundry, dry skin, and premature water heater wear.

Recommendation: A whole-home water softener system is strongly recommended to protect plumbing and home appliances.
Hardness (GPG)

Grains per gallon

11.3 GPG
Hardness (PPM / mg/L)

Parts per million CaCO3

193 mg/L
Appliance Scaling Risk
High / Severe

Official EPA SDWIS Database Entry

Utility: Millstadt · PWSID: IL1630850

Verify on EPA.gov
📋

Violation History

Past 5 years — EPA SDWIS data

Millstadt has recorded 1 violation, but none are health-based (e.g., administrative or monitoring infractions).

Total Violations (5 yr)
1
Health-Based Violations
0
Unresolved Violations
0
Boil Water Advisories
0
Compliance Risk
High

Regulatory compliance risk for this utility is rated High based on past reporting and enforcement records.

⚗️

Contaminants Detected

Contaminants with health-based violations on record

No health-based contaminant violations are on record for ZIP code 62260 under the Safe Drinking Water Act.

⚖ Enforcement Actions

EPA or state regulators have issued 4 enforcement actions to address compliance lapses.
🌊

Water Source & Environmental Factors

Surface Water

This system draws water from lakes, rivers, or reservoirs. Surface water is treated to remove sediment, microorganisms, and chemical contaminants before reaching taps.

Water Source Type
Surface Water
EPA Radon Zone

Moderate potential

Zone 2
Annual Flood Risk Cost

Estimated annual flood-related costs per property

$0
Energy Burden

% of household income spent on energy — indicator of older infrastructure

1.33%

EPA Radon Zone 2 — moderate radon potential. The EPA recommends testing your home regardless of zone designation.

Water Quality Testing in ZIP 62260

Tap Water & Well Testing Recommendations

Residents in ZIP code 62260 served by Millstadt can test tap water or private well systems to verify water purity. Testing detects hidden contaminants before they impact family health.

Tap Water Testing Steps

  • 1.Conduct a certified lead check if your home was constructed before 1986.
  • 2.Use certified lab testing kits rather than uncalibrated test strips for regulated compliance.
  • 3.Sample water from both your kitchen faucet and water heater to compare line purity.

Private Well Testing Steps

  • •Test for Coliform bacteria and Nitrates annually.
  • •Test for heavy metals, radon, and PFAS every 3 years.
  • •Send samples to a state-certified drinking water laboratory recognized by Illinois Environmental Protection Agency.
Certified Lab Testing: Always use an EPA-certified drinking water laboratory in IL for formal legal or real estate compliance testing.

🛡 What Should You Do? — ZIP 62260 Recommendations

  • ✓ Run cold water for 30 seconds each morning before use — especially if pipes are old
  • ✓ Request your annual Consumer Confidence Report from Millstadt
  • ✓ If your home was built before 1986, consider testing your own tap for lead
  • ✓ Use a pitcher filter (NSF/ANSI 42 certified) for improved taste

Recommended Taste & Safety Filter:

🚰

NSF/ANSI 53 Certified Pitcher Filter

Best for removing aesthetic chlorine, odors, and low-level heavy metals.

Filter Selection Guide →

Frequently Asked Questions — ZIP 62260 Water Quality

Is tap water safe to drink in ZIP code 62260?+
Yes — tap water in 62260 (Millstadt, IL) meets EPA standards with a water safety grade of B. No health-based violations are on record in the past 5 years.
How do I get my water tested in ZIP 62260 (Millstadt, IL)?+
To test water quality in ZIP 62260, you can order a certified drinking water test kit or send water samples to an EPA/NELAP certified laboratory in IL. Certified testing checks for lead, coliform bacteria, nitrates, hardness, and PFAS that standard test strips miss. Contact Illinois Environmental Protection Agency for a list of certified regional labs.
How hard is the tap water in 62260?+
Tap water in 62260 is classified as Very Hard with an estimated mineral hardness of 193 mg/L (11.3 GPG). A whole-home water softener system is strongly recommended to protect plumbing and home appliances.
Should I test private well water in 62260?+
Yes. Unlike municipal systems, private wells in 62260 are not regulated by the EPA or local utilities. Private well owners should test their water annually for coliform bacteria and nitrates, and every 3 to 5 years for heavy metals (lead, arsenic) and volatile organic compounds.
What is the lead level in 62260 tap water?+
Lead level data is not available in EPA records for 62260. Contact your utility for details.
Is there an active boil water notice in 62260?+
There are currently no active boil water advisories on record for 62260. Water treatment systems are operating within normal parameters.
Who provides tap water to 62260?+
Tap water in ZIP code 62260 is provided by Millstadt (EPA ID: IL1630850), serving approximately 4,071 residents.
What water filter should I use in 62260?+
Based on water metrics for 62260, we recommend Lead & Microplastic Filter. Look for certifications such as NSF/ANSI 53 (Lead Reduction), NSF/ANSI 42 (Particulate/Taste).

Data Sources & Methodology

Water quality data for ZIP code 62260 is compiled from the EPA Safe Drinking Water Information System (SDWIS), EPA ECHO enforcement database, UCMR5 unregulated contaminant monitoring, and Consumer Confidence Reports filed by Millstadt. Safety scores are composite metrics derived from violation history, lead levels, enforcement actions, and infrastructure risk indicators. Data reflects a 5-year monitoring window. Last dataset update: 2024. View EPA source data →