Skip to main content
WaterSafeCheck
Official EPA SDWIS Verified ReportWater Quality & Testing GuideHistorical Record: No Recorded SDWIS Violations

ZIP Code 74066 Water Quality & Testing Report

Sapulpa, OK · Creek County County · Updated for 2026

Public Health & Medical Notice: Drinking water quality data on this page reflects historical compliance records submitted under the Safe Drinking Water Act. This information does not constitute medical advice or a real-time safety guarantee. If you are pregnant, nursing, preparing infant formula, or immunocompromised, consult a healthcare provider. Boiling water kills biological pathogens, but does NOT remove chemical contaminants like lead, arsenic, or PFAS.
Quick EPA Verified Answer

Is Tap Water Safe to Drink in ZIP 74066 (Sapulpa, OK)?

Caution / Filtration Recommended: Tap water in ZIP code 74066 (Sapulpa, OK) has compliance concerns, earning an EPA Safety Grade of C (63/100) due to 6 health violation(s) and 5.9 ppb lead. While treated by Sapulpa, residents are advised to use an NSF/ANSI 53 certified water filter for drinking and cooking.

Safety Score
C

Water Safety Grade

Fair — Some compliance concerns

Health Violations

6

Total Violations

11

Lead Risk

High

Contaminants

2

⚠

Active Water Quality Issues Detected

EPA records show 6 unresolved violations. Contact Sapulpa for current status.

About Tap Water in ZIP Code 74066

Tap water in ZIP code 74066 (Sapulpa, OK) is distributed by Sapulpa (EPA ID: OK1020404), serving approximately 19,702 residents. Based on EPA Safe Drinking Water Act compliance records, this system receives a water safety grade of C with a composite quality score of 63/100.

Water System

Sapulpa

EPA ID: OK1020404

Water Source

Surface Water

Population Served

19,702 residents

County

Creek County County, Oklahoma

🧪

Lead Levels in ZIP 74066

EPA action level: 15 ppb | Public health goal: 0 ppb

Lead Level: 5.9 ppb — Moderate

The 90th percentile lead level in 74066 is 5.9 ppb. This is below the EPA action level of 15 ppb, but above ideal health goals. Consider a certified lead-reducing filter.

Lead exposure risk in 74066 is rated High. EPA models estimate a 55% exposure probability based on housing and infrastructure age.

Lead Level (90th percentile)
5.90 ppb (0.0059 mg/L)
Lead Exposure Risk Rating
High
Lead Exposure Probability

EPA model estimate based on housing age and infrastructure

55%
Note: Lead levels above are the 90th percentile from EPA monitoring — meaning 90% of samples were at or below this level. Even "undetected" tap water lead doesn't account for lead leaching from home plumbing. If your home was built before 1986, individual tap testing is recommended.
🪨

Water Hardness & Mineral Content

Grains per gallon (GPG) & Parts per million (PPM / mg/L)

Classification: Hard7.8 GPG · 134 mg/L

Water in ZIP 74066 is Hard (134 mg/L / 7.8 GPG). Residents may notice white mineral spots on glassware, reduced soap efficiency, and mineral scale on faucets and showerheads.

Recommendation: An ion-exchange water softener or descaler is recommended to prolong the life of water heaters, dishwashers, and plumbing.
Hardness (GPG)

Grains per gallon

7.8 GPG
Hardness (PPM / mg/L)

Parts per million CaCO3

134 mg/L
Appliance Scaling Risk
High / Severe

Official EPA SDWIS Database Entry

Utility: Sapulpa · PWSID: OK1020404

Verify on EPA.gov
📋

Violation History

Past 5 years — EPA SDWIS data

Sapulpa has recorded 6 health-based violations out of 11 total violations over the past 5 years. 6 violations remain unresolved in EPA tracking records.

Total Violations (5 yr)
11
Health-Based Violations
6
Unresolved Violations
6
Boil Water Advisories
0
Compliance Risk
Critical

Regulatory compliance risk for this utility is rated Critical based on past reporting and enforcement records.

⚗️

Contaminants Detected

Contaminants with health-based violations on record

EPA records identify 2 contaminants with health-based violations in the past 5 years: Haloacetic Acids (HAA5), Stage 2 DBP Rule.

Haloacetic Acids (HAA5)Stage 2 DBP Rule

⚖ Enforcement Actions

EPA or state regulators have issued 10 enforcement actions to address compliance lapses.
🌊

Water Source & Environmental Factors

Surface Water

This system draws water from lakes, rivers, or reservoirs. Surface water is treated to remove sediment, microorganisms, and chemical contaminants before reaching taps.

Water Source Type
Surface Water
EPA Radon Zone

Lower potential

Zone 3
Annual Flood Risk Cost

Estimated annual flood-related costs per property

$5
Energy Burden

% of household income spent on energy — indicator of older infrastructure

2.59%

EPA Radon Zone 3 — lower radon potential, though the EPA still recommends testing all homes.

Water Quality Testing in ZIP 74066

Tap Water & Well Testing Recommendations

Residents in ZIP code 74066 served by Sapulpa can test tap water or private well systems to verify water purity. Testing detects hidden contaminants before they impact family health.

Tap Water Testing Steps

  • 1.Conduct a certified lead check if your home was constructed before 1986.
  • 2.Use certified lab testing kits rather than uncalibrated test strips for regulated compliance.
  • 3.Sample water from both your kitchen faucet and water heater to compare line purity.

Private Well Testing Steps

  • •Test for Coliform bacteria and Nitrates annually.
  • •Test for heavy metals, radon, and PFAS every 3 years.
  • •Send samples to a state-certified drinking water laboratory recognized by Oklahoma Department of Environmental Quality.
Certified Lab Testing: Always use an EPA-certified drinking water laboratory in OK for formal legal or real estate compliance testing.

🛡 What Should You Do? — ZIP 74066 Recommendations

  • ⚠ Use a certified NSF/ANSI 53 filter for drinking and cooking water if you have young children
  • ⚠ Never give unfiltered tap water to infants in formula — use certified bottled or filtered water
  • ⚠ Request a copy of the Consumer Confidence Report to see what was detected and when
  • ⚠ Call the EPA Safe Drinking Water Hotline: 1-800-426-4791

Recommended Water Treatment Systems:

🏺

NSF 53 Lead Pitcher Filter

Specifically certified to reduce lead and copper at the tap.

Lead Filter Guide →
⚗️

NSF 58 Under-Sink RO System

Advanced filtration for PFAS, fluoride, nitrates, and organic chemicals.

RO System Guide →

Frequently Asked Questions — ZIP 74066 Water Quality

Is tap water safe to drink in ZIP code 74066?+
Tap water in 74066 (Sapulpa, OK) meets major standards but has a grade of C due to minor past violations. Vulnerable populations may want to use a certified filter as a precaution.
How do I get my water tested in ZIP 74066 (Sapulpa, OK)?+
To test water quality in ZIP 74066, you can order a certified drinking water test kit or send water samples to an EPA/NELAP certified laboratory in OK. Certified testing checks for lead, coliform bacteria, nitrates, hardness, and PFAS that standard test strips miss. Contact Oklahoma Department of Environmental Quality for a list of certified regional labs.
How hard is the tap water in 74066?+
Tap water in 74066 is classified as Hard with an estimated mineral hardness of 134 mg/L (7.8 GPG). An ion-exchange water softener or descaler is recommended to prolong the life of water heaters, dishwashers, and plumbing.
Should I test private well water in 74066?+
Yes. Unlike municipal systems, private wells in 74066 are not regulated by the EPA or local utilities. Private well owners should test their water annually for coliform bacteria and nitrates, and every 3 to 5 years for heavy metals (lead, arsenic) and volatile organic compounds.
What is the lead level in 74066 tap water?+
The 90th percentile lead level in 74066 is 5.9 ppb. The EPA action level is 15 ppb. This is below the EPA action level.
Is there an active boil water notice in 74066?+
There are currently no active boil water advisories on record for 74066. Water treatment systems are operating within normal parameters.
Who provides tap water to 74066?+
Tap water in ZIP code 74066 is provided by Sapulpa (EPA ID: OK1020404), serving approximately 19,702 residents.
What water filter should I use in 74066?+
Based on water metrics for 74066, we recommend Reverse Osmosis (PFAS & Lead). Look for certifications such as NSF/ANSI 58 (Reverse Osmosis), NSF/ANSI 53 (Lead & VOCs), NSF/ANSI P473 (PFAS/PFOS).

Data Sources & Methodology

Water quality data for ZIP code 74066 is compiled from the EPA Safe Drinking Water Information System (SDWIS), EPA ECHO enforcement database, UCMR5 unregulated contaminant monitoring, and Consumer Confidence Reports filed by Sapulpa. Safety scores are composite metrics derived from violation history, lead levels, enforcement actions, and infrastructure risk indicators. Data reflects a 5-year monitoring window. Last dataset update: 2024. View EPA source data →